Asus MYPAL A636 - Manual (Page 13)

Getting Started 7
Additional storage
MyPal A636 comes with the standard SD card slot while MyPal A632 has
an additional mini SD card slot. The SD card slot can be inserted with SD
or MMC memory cards. It also supports SDIO cards of various
functionalities including 802.11b, modem, etc.
Label
Installing and removing SD/MMC/SDIO card
1. With the label side (usually the side with the card
manufacturer’s name) face up, and the barcode/
serial number side face down, insert the card into
the SD card slot located on top of the device.
2. Push the card all the way into the slot until it fits
completely. If properly installed, the SD or MMC
card edge aligns with the top edge of the device.
SDIO cards usually have an extended part that
protrudes over the slot edge.
3. To remove, press the card slightly until it ejects
out. You may then safely remove the card.
NOTE An SD/MMC/SDIO/mini SD card fits only
in one orientation, and slides smoothly
into the slot if inserted correctly. DO NOT
force the card into the slot!
1. Flip open the mini SD card slot
cover.
2. With the label side (usually the side
with the card manufacturer’s name)
face up, and the barcode/serial
number side face down, insert the
card into the mini SD card slot
located on the left side of the device.
3. Push the card all the way into the slot until it fits completely.
4. To remove, press the card slightly until it ejects out. You may then
safely remove the card.
Installing and removing mini SD card
(for A632 only)
Label side