Asus WL-500W - Manual (Page 7)

WL-500W Wireless Router Quick Start Guide
English
Static IP user
If you are using ADSL or other connection type that uses static IP address, select ADSL
or other connection type that uses static IP address. Input the IP address, subnet
mask, and default gateway provided by your ISP. You can specify DNS servers, or get
DNS information automatically.
PPPoE user
If you use PPPoE service, select ADSL connection that requires username and
password. It is known as PPPoE. You need to input the username and password
provided by your ISP. Click Next to continue.
PPTP user
If you are using PPTP services, select ADSL connection that requires username,
password and IP address. Fill in the username, password and IP address provided by
your ISP into the fields. Click Next to continue.
herk036@adsl-comfort
3. To set up your wireless interface, specify an SSID (Service Set Identifier), which is
a unique identifier attached to packets sent over WLAN. This identifier emulates a
password when a device attempts to communicate with your wireless router via WLAN.
qe3336 WL500W 2.indd 6 11/1/07 5:41:43 PM