Asus NRL-LS - Manual (Page 45)

ASUS NRL-LS motherboard user guide 2-19
4. ATX power connectors (24/20-pin ATXPWR, 4-pin ATX12V)
These connectors connect to an ATX 12V power supply. The plugs
from the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
In addition to the 24/20-pin ATXPWR connector, this motherboard
requires that you connect the 4-pin ATX +12V power plug to provide
sufficient power to the CPU.
Make sure that your ATX 12V power supply can provide 8A on the
+12V lead and at least 1A on the +5-volt standby lead (+5VSB). The
minimum recommended wattage is 250W, or 300W for a fully
configured system. The system may become unstable and may
experience difficulty powering up if the power supply is inadequate.
NRL-LS
®
NRL-LS ATX Power Connector
For Power Supply with
20-pin Power Connector
24-pin Power Connector
1
ATXPWR
ATX12V
+12V DC
GND
+12V DC
GND
-5 V
olts
+5 V
olts
+3 V
olts
-12 V
olts
Ground Ground Ground PSON# Ground +5 V
olts
+5 V
olts
Ground
+3 V
olts
+3 V
olts
Ground
+5 V
olts
+5 V
olts
Ground Ground
Power OK
+5V Standby
+12 V
olts
+12 V
olts
+3 V
olts