Asus NRL-LS - Manual (Page 41)

ASUS NRL-LS motherboard user guide 2-15
1. Fast Ethernet setting (3-pin J1)
These jumpers are set by default, pins [1-2], to enable the onboard
INTEL 82540 Fast Ethernet controller to support 10/100/1000BASE-TX
networking. Set the jumper to pins 2-3 to disable the controller.
NRL-LS
®
NRL-LS LAN Setting
J1
(Default)
1
2
Enable Disable
2
3
2.7.2 Jumpers
NRL-LS
®
NRL-LS VGA Setting
J3
Enable
(Default)
1 2
Disable
2 3
2. VGA setting (3-pin J3)
This jumper is set by default, pins [2-3], to enable the onboard the
onboard ATI Rage XL VGA controller. Reset to pins 1-2 to disable the
VGA controller.