Asus PU-DLS - Manual (Page 84)

4-26 Chapter 4: BIOS Setup
Power On By PS/2 Keyboard [Disabled]
This parameter allows you to any key on the keyboard to turn on the
system. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead. You must also set jumper J14 to enabled (pins 2-3)
to activate the keyboard wake-up feature. Configuration options: [Disabled]
[Enabled]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may
configure your system to power up at a certain time of the day by selecting
[Everyday] or at a certain time and day by selecting [By Date].
Configuration options: [Disabled] [Everyday] [By Date]