Asus PU-DLS - Manual (Page 42)

2-16 Chapter 2: Hardware information
5. Keyboard wake-up setting (J14)
Set this jumper to pins 1-2 to disable the keyboard wake-up feature.
Set to pins 2-3 to enable the wake-up feature.
6. Onboard VGA setting (J2)
This jumper allows you to enable or disbale the onboard VGA feature.
Set to pins 1-2 to disable the onboard VGA controller if you wish to
install a VGA card. Set to pins 2-3 to enable the onboard VGA feature.
PU-DLS
®
J14
PU-DLS Keyboard WAKE-UP Setting
(Default)
Enable Disable
1 2 2 3
PU-DLS
®
PU-DLS ATI RageXL VGA Setting
J2
(Default)
Enable Disable
1
2
2
3