Input signal selection – Asus ET2701IUTI User Manual
Page 25
English
25
All-in-one PC ET2700 Series
5.
System Setup
• OSD Setup:
•
Adjusts the horizontal position (H-Position) / vertical position (V-Position) of the OSD
menu.
•
Adjusts the OSD timeout from 10 to 120 seconds.
•
Enables or disables the DDC/CI (Display Data Channel/Command Interface) function.
• Information: Shows the monitor information.
• Language: Allows you to set the OSD language.
• Device Share: Enables or disables the Device Share function. When enabled, the HDMI and
VGA items under the Input Select menu will be replaced as HDMI with Device Share and
VGA with Device Share.
• All Reset: Allows you to reset all OSD settings.
Input signal selection
An Input Select OSD menu appears when you connect the HDMI or VGA cable to the rear
HDMI-input or Display-input port. Use the Volume Increase (
) / Decrease (
) buttons to
navigate through the input options and press the MENU button to activate the option. Refer to
4. Input Select in the previous section for details.