Asus VX1 - Manual (Page 44)

44
4
Using the Notebook PC
Inserting a PC Card or ExpressCard
1. Press in the toggle eject button and release.
The recessed spring loaded toggle button
will extend when pushed in and released.
2. Press the extended button again to eject the
PC Card. Carefully pull the ejected PC card
out of the socket.
Removing a PC Card
To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the
PC card icon on the Windows taskbar and stop the PC card you want to remove.
3
4
1 Be sure the PC card is
level when inserting. 2
5
3. Carefully connect any cables or adapters
needed by the PC card. Usually connectors can
only be inserted in one orientation. Look for a
sticker, icon, or marking on one side of the con-
nector representing the top side.
1. If there is a PC Card socket protector, remove
it using the “Removing a PC Card” instructions
below.
2. Insert the PC card with the connector side first
and label side up. Standard PC cards will be
flush with the Notebook PC when fully inserted.
Removing an ExpressCard
The ExpressCard slot does not have an eject button. Remove the ExpressCard like a memory card.
Press the ExpressCard inwards and release to eject the ExpressCard.