Asus AGP-V3000 - Manual (Page 24)

24 ASUS AGP-V3000 User’s Manual
VIII. Troubleshooting
Description
After installing the driver,
Windows 95 doesn't
prompt me to restart and
the driver still doesn't
work after I restart my
computer.
Recommended Action
You may have installed similar drivers before. Try the
following steps to install:
1. Right-click My Computer on the desktop.
2. Select Properties. The System Properties dialog
box appears.
3. Click the Device Manager tab. Be sure that View
devices by type is selected.
4. Double-click Display adapters. If Display adapt-
ers does not appear, jump to step 8 and continue.
5. The name of your card will be listed in the box.
Double-click it.
6. The properties box of your card appears. Click the
Driver tab.
7. Click Change Driver... and follow the installation steps.
8. Click Other devices. Your card should be listed.
9. Click the name of your card to bring up the proper-
ties box of your card. Select the Driver tab.
10. Click Change Driver... and follow the installation steps.
After installation and re-
starting, Windows 95 in-
forms me that the display
setting is still incorrect. There may be a conflict between a previous and the
current display drivers. This is caused by the incom-
plete removal of the previous display driver. Try the
following steps to remove it:
1. Right-click My Computer on the desktop.
2. Select Properties. The System Properties dialog
box appears.
3. Click the Device Manager tab. Be sure that View
devices by type is selected.
4. Double-click Display adapters.
5. You will find two (or more) conflicting adapters.
6. Disable all previous adapters by selecting them and
clicking Remove.
7. Close Device Manager and restart Windows 95.
8. Your display driver should work correctly this time.
My monitor is not capable
of high resolution or re-
fresh rate. It depends on the display characteristics of your moni-
tor. Consult your monitor documentation for the proper
configuration.
VIII. T
roubleshooting
Descriptions/Actions