Asus P3-PE5 - Manual (Page 89)

5-29 ASUS Pundit P3-PE5
5.5.4 Hardware Monitor
The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press to display
the configuration options.
Select Menu
Item Specific Help
Press [Enter] to enable or
disable.
Hardware Monitor
Q-Fan Controller [Enabled]
Vcore Voltage [1.29V]
3.3V Voltage [3.33V]
5V Voltage [4.96V]
x 12V Voltage [11.96V]
CPU Temperature 54C
M/B Temperature 40C
CPU Fan Speed 2136 RPM
CPU Fan Speed warning [800 RPM]
Start Up Temperature (C) [50]
Full Speed Temperature (C) [70]
Start Up PWM [60]
Slope PWM [4 PWM/C]
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Q-Fan Controller [Enabled]
Disable or Enable the Q-Fan controller. Configuration options: [Disabled]
[Enabled]
Vcore Voltage [Enabled]
Sets the Vcore Voltage. Configuration options: [1.29V] [Ignored]
3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
CPU Temperature, M/B Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU Fan Speed
The onboard hardware monitor automatically detects and
displays the CPU fan speeds in rotations per minute (RPM).
These items are not user-configurable.
CPU Fan Speed warning [ 800 RPM]
Allows you to disable or set the CPU fan warning speed.
Configuration options: [Disabled] [800 RPM] [1200 RPM] [1600 RPM]