Asus A7M266 - Manual (Page 19)

ASUS A7M266 User’s Manual 19
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
Setting JEN
JumperFree [2-3] (default)
Jumper Mode [1-2]
0 1 0 1
A7M266
®
A7M266 Jumper Mode Setting
Jumper Mode Jumper Free
(Default)
1 2 2 3
JEN
3 4
VID2
VID3
VID1
VID4
NOTE: In JumperFree™ mode, all VID1-4 must be set to [3-4].
Motherboard Features Settings (DIP Switches - DSCKF)
The motherboard’s onboard functions are adjusted through the DIP switches. The
white block represents the switch’s position. The example below shows all the
switches in the OFF position.
0 1 0 1
A7M266
®
A7M266 DIP Switch
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
DSCKF
ON OFF
ON 12
34