GC EUROPE GRADIA - Manual (Page 28)

E 2
DA 2
9. DENTIN
Build-up DENTIN to form and shape
crown.
Leave room for ENAMEL.
Create mamelons from incisal to
about center of crown. Brush surface to prevent bubbles
forming with ENAMEL application. ENAMEL will be added later to cover
incisal 2/3. P ro x i m a l v i e w o f D E N T I N
application.
10. ENAMEL (E) 11. AIR BARRIER
Apply ENAMEL, starting from incisal
and feathering down to about the
center of crown. Note: For deeper cervical colour,
add CERVICAL DENTIN. A f t e r a p p l y i n g C E R V I C A L
TRANSLUCENT. After applying ENAMEL.
Coat surface with GC GRADIA AIR
BARRIER in usual manner.
12. FINAL LIGHT CURING 13. FINAL SHAPING
Use GC LABOLIGHT LV-II/LV-III for final
cure then wash off GC GRADIA AIR
BARRIER with water. Shape, form and refine crown
anatomy, with diamond and
carborundum points. Accentuate surface features with
diamond and carborundum points
then smooth with silicone points. Use GC GRADIA DIAPOLISHER
on felt and/or chamois wheel for a
lustrous finish.
Use Robinson Wheel or similar
together with GC GRADIA
DIAPOLISHER, taken care not to
damage the surface texture.
Polish & Buff
26
GC STEPLIGHT SL-I 10 seconds
GC LABOLIGHT LV-II, III 30 seconds
GC LABOLIGHT LV-I 60 seconds
Chart 2 - Curing time for Dentin/Enamel
bodies and intensive colours
GC LABOLIGHT LV-II, II 3 minutes
GC LABOLIGHT LV-I 3-5 minutes
Chart 3 – Final curing time
Light cure: see chart 2 Light cure: see chart 2
Light cure: see chart 2
Light cure: see chart 3