1 adjusting the water softener, Manual adjustment, Electronic adjustment – AEG F88082W0P User Manual
Page 27
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
6.1 Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Elec-
tronic
51 - 70
91 - 125
9.1 - 12.5
64 - 88
2
1)
10
43 - 50
76 - 90
7.6 - 9.0
53 - 63
2
1)
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
2
1)
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
2
1)
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
2
1)
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
2
1)
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
1
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
1
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
< 4
< 7
< 0.7
< 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode.
2. Press and hold, at the same time, De-
lay and Option until the indicators of
,
and
start to flash.
3. Press Program,
• The indicators of
and
go off.
• The indicator of
contin-
ues to flash.
ENGLISH
27