AEG F88082W0P - Manual (Page 26)

How to activate the ExtraHygiene
option
1. Press Option until the ExtraHygiene
indicator comes on. In the display
you can see the update of the pro-
gramme duration.
• If the option is not applicable to
the programme, the related indica-
tor does not come on.
5.3 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press the on/off button to activate
the appliance.
2. Press Option until the Multitab indi-
cator comes on.
The option stays on until you deactivate
it. Press Option until the Multitab indica-
tor goes off.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the Multitab option.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the wa-
ter hardness in your area.
6. Adjust the released quantity of rinse
aid.
5.4 AutoOpen
This option gives good drying results
with less energy consumption.
This option is automatically activated
when you set the programme
.
The AutoOpen indicator comes on.
It is not possible to set this option with
other programmes.
• While the drying phase operates, a
device opens the appliance door and
keeps it ajar.
• At the end of the programme, the de-
vice and the appliance door retract.
The appliance automatically deacti-
vates.
CAUTION!
Do not try to close the appliance
door while the device keeps the
door ajar. This can cause dam-
age to the appliance. If you want to deactivate the AutoOpen
option, press Option until the related in-
dicator goes off.
In this condition, the energy consump-
tion of the programme increases.
6. BEFORE FIRST USE
1. Make sure that the set level of the
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
26 www.aeg.com