SCANTECH ID (Champtek company) LIBRA L-7080i - Manual (Page 29)

LIBRA L-7050
23
A. CONNECTOR TYPES AND PIN DEFINITIONS
LIBRA L-7080i supports multiple interfaces RS232 and USB. The various pin definitions for
each type of interface are given below.
IMPORTANT
Various interface cables are available depending on the kind of
host system you are using. Contact your supplier for availability.
In case you need a special purpose cable, you can refer to the
information below.
The Connector type of LIBRA L-7080i: RJ-48, 10 pins.
Pin Definition for multiple interface
Multiple Interface
RS-232 USB
Pin Description Description Remark
1 - IFID IFID=Interface ID
2 CTS -
3 RxD -
4 TxD
5 RTS -
6 Ground Ground Ground
7 +5V +5V 5V, may be used to power scanner *
8 - -
9 - D + D + = USB data
10 - D - D - = USB data
*LIBRA L-7080i only requires one single DC input.