Procom CXL 700-3sl User Manual
Cxl 700-3sl

CXL 700-3SL
Collinear, 3 dBd Base Station Antenna for the 700 MHz
Band
DESCRIPTION
CXL 700-3SL is a 3 dBd, vertically polarized, omnidirectional base station
antenna covering the 746 – 807 MHz band.
The antenna is designed especially for high power of max. 500 W.
The antenna is provided with our type "SL" (slim line) mast mount which
is a multipurpose mounting tube made of non-corrosive aluminium. The
accompanying clamp set and fittings are made of hot galvanized steel.
CXL 700-3SL can be mounted on 33 to 70 mm dia. mast tubes.
The carefully designed radiating element is sealed in a high-quality,
conical glass fibre tube with low wind load ensuring performance
undisturbed by corrosive environments.
To substantially reduce noise caused by atmospherical discharges, all
metal parts in the antenna are DC-grounded. Consequently, the antenna
shows a DC-short across the coaxial cable.
The exceptional mechanical capabilities of this antenna ensure long
dependable service in all environments.
*
The top of the mounting SL tube must be in alignment with the top of the
mast.
ORDERING DESIGNATIONS
TYPE
FREQUENCY
PRODUCT NO.
CXL 700-3SL
746 – 807 MHz
100000475
SPECIFICATIONS
ELECTRICAL
MODEL
CXL 700-3SL
ANTENNA TYPE
Collinear, broad-band
FREQUENCY
746 - 807 MHz
IMPEDANCE
Nom. 50 Ω
RADIATION
Omnidirectional
POLARIZATION
Vertical
GAIN
5 dBi 3 dBd
HALF POWER BEAMWIDTH 30°
BANDWIDTH
61 MHz
SWR
≤ 1.5
MAX. POWER
500 W
ANTISTATIC PROTECTION
All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
CONNECTOR
N-female
WIND SURFACE
0.033 m² / 0.36 ft²
WIND LOAD
38 N @ 160 km / 99.42 mph.
COLOUR
Marine white
MATERIALS
Shroud: Polyurethane-coated glass fibre
Mounting bracket: Seawater-resistant aluminium,
epoxy-coated
Clamps: Stainless steel
TOTAL HEIGHT
Approx. 0.8 m / 31.5 in.
WEIGHT
Approx. 5.0 kg / 11.02 lb.
MOUNTING
On 33 - 70 mm / 1.3 – 2.76 in. dia. mast tube
ENVIRONMENTAL
TEMP. RANGE
-30°C → +70°C
PROCOM CLAMP SET (INCLUDED)