Procom BPF 70-33-tetra-...-... - Manual

BPF 70/33-TETRA-...-...
6 Resonator Band-Pass Filter for TETRA Band
DESCRIPTION
The BPF 70/33-TETRA-...-... are 6 resonator band-pass filters designed
for TETRA.
The filters use reduced-length ¼ λ cavities in a compact, strong
aluminium housing. Teflon insulation has been applied in the coaxial
cables and in the connectors.
19” drawers available as options.
Built-in DC stop between all ports.
BPF 70/33-TETRA-N-...
SPECIFICATIONS
ELECTRICAL
MODEL BPF 70/33-TETRA-...-...
MAX. INPUT POWER 200 W
TX/RX-FREQUENCY See ordering designations
INSERTION LOSS IN PASSBAND ≤ 1.5 dB (typ. 1.3)
ATTENUATION IN STOPBAND > 55 dB / 5 MHz
Typ. 58 dB / 5 MHz
IMPEDANCE Nom. 50 Ω
SWR (All ports) ≤ 1.5 (typ. ≤ 1.3)
MECHANICAL
CONNECTORS N-female or 7/16-female
DIMENSIONS (L x W x H) 220 x 155 x 86 mm / 8.66 x 6.10 x 3.39 in.
WEIGHT Approx. 3500 g / 7.72 lb.
ENVIRONMENTAL
TEMP. RANGE –20° C → +60° C
ORDERING DESIGNATIONS
TYPE PRODUCT NO. MHZ
BPF 70/33-TETRA-N-1 200001953 380 - 385
BPF 70/33-TETRA-N-2 200001954 385 - 390
BPF 70/33-TETRA-N-3 200001955 390 - 395
BPF 70/33-TETRA-N-4 200001956 395 - 400
BPF 70/33-TETRA-N-5 200001957 410 - 415
BPF 70/33-TETRA-N-6 200001958 415 - 420
BPF 70/33-TETRA-N-7 200001959 420 - 425
BPF 70/33-TETRA-N-8 200001960 425 - 430
BPF 70/33-TETRA-N-9 200001961 450 - 455
BPF 70/33-TETRA-N-10 200001962 455 - 460
BPF 70/33-TETRA-N-11 200001963 460 - 465
BPF 70/33-TETRA-N-12 200001964 465 - 470
ORDERING DESIGNATIONS
TYPE PRODUCT NO. MHZ
BPF 70/33-TETRA-7/16-1 200001629 380 - 385
BPF 70/33-TETRA-7/16-2 200002023 385 - 390
BPF 70/33-TETRA-7/16-3 200002024 390 - 395
BPF 70/33-TETRA-7/16-4 200002025 395 - 400
BPF 70/33-TETRA-7/16-5 200002026 410 - 415
BPF 70/33-TETRA-7/16-6 200002027 415 - 420
BPF 70/33-TETRA-7/16-7 200002028 420 - 425
BPF 70/33-TETRA-7/16-8 200002029 425 - 430
BPF 70/33-TETRA-7/16-9 200002030 450 - 455
BPF 70/33-TETRA-7/16-10 200002031 455 - 460
BPF 70/33-TETRA-7/16-11 200002032 460 - 465
BPF 70/33-TETRA-7/16-12 200002033 465 - 470
TYPICAL RESPONSE CURVES
PROCOM A/S reserve the right to amend specifications
without prior notice.
18/02/14