Procom MU 807-xg-... - Manual

MU 807-XG/...
Unity Gain ¼ λ Mobile Antenna for the 800 MHz band with
GPS
PRELIMINARY DATA SHEET
DESCRIPTION
External antenna whip mounted on the XG-mount.
Silicone covered flexibe steel wirw whip.
Two models:
MU 807-XG/l: 768 - 806 MHz
MU 807-XG/h: 806 - 869 MHz
Stainless steel XG-mount with M6-thread whip-fastening system.
Choice between mounts with FME-connection (without cable) or
models with permanently attached 4 m cable with FME connector.
Easily removable whip for car wash.
GPS-antenna for fixed installations.
Full hemispherical coverage.
Built-in high-gain, low-noise amplifier.
Right-Hand Circular Polarization (RHCP).
2.85 V - 5 V supply voltage (typical 3 V).
COMING SOON
ORDERING DESIGNATIONS
TYPE FREQUENCY MOUNT VERSION PRODUCT NO.
MU 807-XG/l 768 - 806 MHz XG-mount (oblong)
with FME-system
MU 807-XG/h 806 - 869 MHz Same mount as above
MU 807-XGP4/l 768 - 806 MHz XGP4-mount (oblong) with
4 m cable + FME-system
MU 807-XGP4/h 806 - 869 MHz Same mount as above
SPECIFICATIONS
ELECTRICAL
MODEL MU 807-XG/...
ANTENNA TYPE ¼ λ mobile antenna
FREQUENCY 800 MHz-band covered by two models
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 0 dB (acc. to EIA RS-329-1)
BANDWIDTH > 80 MHz @ SWR ≤ 1.5
> 140 MHz @ SWR ≤ 2.0
SWR ≤ 1.2 @ f. res.
MAX. POWER 60 W
MECHANICAL
MATERIALS Whip:
Steel wire covered with silicone tubing
Black-chromed brass
Mount:
Black-chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION
TORQUE
4 ± 1 Nm
COLOUR Black
HEIGHT Approx. 100 mm
WEIGHT XG-version: Approx. 55 g
XGP4-version: Approx. 195 g
MOUNTING 18 mm dia. hole
ELECTRICAL FOR GPS-PART
OPERATING FREQUENCY 1575.42 ±1.023 MHz
LNA GAIN 22 dB ±2 dB
NOISE FIGURE Max. 1.5 dB (typical 1.1 dB)
VOLTAGE DC 2.85 V ~ 5 V (typical 3 V)
CURRENT ≤ 20 mA
IMPEDANCE Nom. 50 Ω
MECHANICAL
CONNECTOR Cable: RG 178, length 150 mm
Connector: FME-male