Procom DC-BLK-2.5G-... - Manual

DC-BLK-2.5G-...
DC-block
DESCRIPTION
DC-blocking of both conductor and ground for galvanic separation.
High RF power rating.
High DC voltage rating.
Large frequency range.
Available with N- or 7/16 DIN-connectors.
Fits directly into the coaxial line.
Can be installed in any direction.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
DC-BLK-2.5G-N(f)-(f) 210001801
DC-BLK-2.5G-N(m)-(f) 210001802
DC-BLK-2.5G-7/16 DIN(f)-(f) 210001803
DC-BLK-2.5G-7/16 DIN(m)-(f) 210001804
SPECIFICATIONS
ELECTRICAL
MODEL DC-BLK-2.5G-...
TYPE DC-block
FREQUENCY
RANGE
R1: 50 - 500 MHz
R2: 800 - 1100 MHz
R3: 1700 - 2500 MHz
INSERTION LOSS R1: <0.2 dB
R2: <0.3 dB
R3: <0.4 dB
SWR R1: < 1.2
R2: < 1.2
R3: < 1.3
MAX. VOLTAGE 1 kV DC (Input centre to output centre conductor)
1.4 kV DC (Centre conductor to ground)
2 kV DC (Input ground to output ground)
POWER
HANDLING
R1: Max. 250 W
R2: Max. 250 W
R3: Max. 100 W
7/16 DIN-connectors are recommended for high-
power applications.
MECHANICAL
COMPLIANCE RoHS, IP65
MAINTENANCE None
TEMP. RANGE -30° C → +60° C
CONNECTORS N or 7/16 DIN (see ordering designations)
INSTALLATION OF 7/16 DIN-CONNECTORS
TORQUE 25 - 30 Nm with backstop
TOOLS Torque wrench and a 24 mm wrench for backstop
SIZE (L x W x H) 70 x 40 x 38 mm / 2.76 x 1.57 x 1.50 in.
with N-connector
85 x 40 x 38 mm / 3.35 x 1.57 x 1.50 in.
with 7/16 DIN-connector
WEIGHT 150 g / 0.33 lb. with N-connector
235 g / 0.52 lb. with 7/16 DIN-connector
MOUNTING ø4.2 mm (4 holes)