Procom CXL 1800-1lw - Manual

CXL 1800-1LW
Universal, 0 dBd Base Station and Marine Antenna for the
1800 MHz Band
DESCRIPTION
CXL 1800-1LW is a 0 dBd, vertically polarized, omnidirectional base
station and marine antenna for the 1800 MHz band.
The carefully designed, broad-banded antenna element is sealed in a
high-quality, conical glass fibre tube with low wind-load, which will
ensure performance undisturbed by corrosive environments.
Provided with the sturdy “LW” mast mount – a lightweight,
multipurpose, epoxy-coated mounting bracket made of non-corrosive
aluminium.
The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to
54 mm in outer diameter.
The cable can be led either on the outside or along the inside of the
mast tube.
Large bandwidth with respect to both SWR and gain.
To substantially reduce noise caused by atmospherical discharges, all
metal parts in the antenna are DC-grounded. Consequently, the antenna
shows a DC-short across the coaxial cable.
The CXL 1800-1LW is a vibration-proof, lightweight, slim-line, corrosion
resistant, modern style base station and marine antenna.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
CXL 1800-1LW 100000177
SPECIFICATIONS
ELECTRICAL
MODEL CXL 1800-1LW
ANTENNA TYPE ½ λ coaxial dipole, broad-banded
FREQUENCY 1710 – 1880 MHz
IMPEDANCE Nom. 50 Ω
RADIATION Omnidirectional
POLARIZATION Vertical
GAIN 2 dBi 0 dBd
BANDWIDTH ≥ 170 MHz @ SWR ≤ 2.0
SWR ≤ 2.0
MAX. POWER 100 W
ANTISTATIC
PROTECTION
All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE Approx. 0.018 m²
WIND LOAD 23 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Seawater resistant aluminium,
epoxy-coated
Clamps: Stainless steel
TOTAL HEIGHT Approx. 490 mm
DIA. IN TOP END 14 mm
DIA. IN BOTTOM END 16 mm
WEIGHT Approx. 500 g
MOUNTING On 16 to 54 mm dia. mast tube
MULTI-PURPOSE MOUNTING BRACKET
PLEASE NOTE
The antenna is delivered with a DC-connection between the antenna
element and the mounting bracket.