Procom DIPX 1000-1550-... - Manual

DIPX 1000/1550-...
Diplexer for the 0 - 1000 MHz and 1550 - 2500 MHz
Ranges
DESCRIPTION
Diplexer for combining or splitting the two ranges 0 - 1000 MHz and
1550 - 2500 MHz.
Excellent wide-band coverage – usable for a lot of applications.
Extremely small dimensions.
Quick installation using the dual-adhesive pad provided.
FME-connections on all terminals.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. DC PASS
DIPX 1000/1550-DC-L 200000750 Low port
DIPX 1000/1550-DC-H 200000749 High port
DIPX 1000/1550-DC-LH 200000748 Low and high port
DIPX 1000/1550-DC-NO 200002054 No pass
SPECIFICATIONS
ELECTRICAL
MODEL DIPX 1000/1550-...
FREQUENCY Low port : 0 - 1000 MHz
High port : 1550 - 2500 MHz
MAX. INPUT POWER 35 W each port
INSERTION LOSS 0 - 1000 MHz : < 0.8 dB typ. < 0.6 dB
1550 - 2500 MHz: < 1.0 dB typ. < 0.6 dB
ISOLATION Low to high port: ≥ 45 dB
IMPEDANCE 50 Ω on all terminals
MECHANICAL
TEMP. RANGE –30° C → +70° C
CONNECTORS Low : FME
High : FME
Antenna: FME
DIMENSIONS (W x H x D) 50 x 21 x 50 mm
WEIGHT Approx. 60 g
TYPICAL RESPONSE CURVES
The DIPX 1000/1550-... makes it possible to use only one antenna for the
operation of two transceivers (one in each range). See the figure below. The
antenna must be a dual-frequency antenna, i.e. it must be resonant on the
actual frequencies in the two bands. The transceivers may be used
independently and will have no degrading influence on each other. Typically,
the diplexer is installed next to the transceivers and only one cable is used
between the diplexer and the antenna. The diplexer is suitable both for base
station and mobile use.
The main tasks of the diplexer are to protect the individual receiver input
from being destroyed by the transceiver in the contrary band and to ensure
a low-loss path between the transceiver and the antenna which is not
loaded by the other branch.
The diplexer can be operated together with any set of transceivers operating
within the 0 - 1000 MHz and 1550 - 2500 MHz frequency bands.
Dual-frequency antennas are available for both mobile and base station
applications.
PROCOM A/S reserve the right to amend specifications
without prior notice.
03/06/13