Procom SB 4-...-fme - Manual

SB 4/...-FME
Steel-Band Antenna with Universal FME-Connection System
for Portable Equipment in the 4 m Band
DESCRIPTION
Rugged, flexible steel-band antenna whip.
Curved sectional area to help keeping the antenna erect.
Shortened ¼ λ whip yields an acceptable mechanical length.
Provided with toggle joint and wing screw for easy fold-down.
Delivered factory tuned and tested to ensure minimum SWR and
optimum performance.
Provided with universal FME-connection system for optimum flexibility
and easily exchangeable connectors.
Designed for use with the following of Procoms line of black FME-
connectors (to be ordered separately): BFME-UHF, BFME-BNC, BFME-
TNC, and BFME-N.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY
SB 4/l-FME 140000075 66 - 76 MHz
SB 4/m-FME 140000076 72 - 82 MHz
SB 4/h-FME 140000074 78 - 88 MHz
SPECIFICATIONS
ELECTRICAL
MODEL SB 4/...-FME
ANTENNA TYPE Shortened ¼ λ antenna for portable equipment
FREQUENCY
4 m band covered by three models
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
BANDWIDTH
≥ 10 MHz @ SWR ≤ 3.0
SWR < 2 when mounted directly on portable equipment
MAX. POWER 25 W
MECHANICAL
MATERIALS Stainless steel band and rubber Black-chromed brass
COLOUR Black
TOTAL HEIGHT 650 mm (dep. on type)
WEIGHT
Approx. 85 g
CONNECTOR FME (female) (Exchangeable BFME-connectors to be ordered
separately)
RECOMMENDED BFME-CONNECTORS
(To be ordered separately)
PLEASE NOTE
The SB 4 is also available with different thread studs, but in this
case with fixed, non-exchangeable connector (not FME-connection
system). Information on these special versions on request.
PROCOM A/S reserve the right to amend specifications
without prior notice.
15/03/13