Procom DPF 70-6-150... - Manual

DPF 70/6-150…
6-Cavity Base Station Duplexers for the 450 MHz-Band
DESCRIPTION
150 W base station duplexers.
Both the ¼ λ models and the ¾ λ models are continuously tunable from
406 to 470 MHz.
Low insertion loss due to silver-plated, temperature compensated
resonator elements in high-Q 40 x 40 mm cavities.
Multi-channel tuning possible with slightly reduced data (factory tuning
recommended).
Fully environmentally tested.
DPF 70/6-150 cavity type ¼ λ
DPF 70/6-150 cavity type ¾ λ
ORDERING DESIGNATIONS
TYPE PRODUCT NO. CAVITY
TYPE
DUPLEX SPACING
(MHZ)
DPF 70/6-150-2/3 200000369 ¼ λ 2 - 3
DPF 70/6-150-3/5 200001617 ¼ λ 3 - 5
DPF 70/6-150-5/7 200001610 ¼ λ 5 - 7
DPF 70/6-150-7/9 200001615 ¼ λ 7 - 9
DPF 70/6-150-9/11 200001612 ¼ λ 9 - 11
DPF 70/6-150-11/13 200001872 ¼ λ 11 - 13
DPF 70/6-150-13/15 200001873 ¼ λ 13 - 15
DPF 70/6-150-2/3-¾ 200001689 ¾ λ 2 - 3
DPF 70/6-150-3/5-¾ 200002062 ¾ λ 3 - 5
SPECIFICATIONS
ELECTRICAL
MODEL DPF 70/6-150-2/3-¾ DPF 70/6-150-3/5
CAVITY TYPE ¾ λ ¼ λ
TX/RX FREQUENCY 406 - 470 MHz
MAX. INPUT POWER 150 W
TUNING Single-
channel
tuned.
Spacing
= 2 MHz
100 W
Single-
channel
tuned.
Spacing
= 3.5 MHz
100 W
Single-
channel
tuned.
Spacing
= 5 MHz
150 W
Multi-
channel
tuned.
Spacing
= 5 MHz
Port width
= 2 MHz
100 W
INSERTION LOSS
TX - ANT. AND
ANT. - RX
≤ 1.4 dB ≤ 1.3 dB ≤ 1.2 dB ≤ 1.4 dB
TX NOISE SUPPRESSION
ON RX-FREQ.
> 70 dB > 80 dB > 80 dB > 60 dB
RX ISOLATION ON
TX-FREQUENCY
> 70 dB > 80 dB > 80 dB > 60 dB
DUPLEX SPACING 2 - 3 MHz 3 - 5 MHz
IMPEDANCE Nom. 50 Ω
SWR ≤ 1.5 ≤ 1.5 ≤ 1.5 ≤ 1.5
MECHANICAL
TEMP. RANGE –30° C → +60° C
FREQ. STABILITY Approx. 4.5 ppm/° C
CONNECTOR TYPE N-female
COLOUR Black
DIMENSIONS
(L x W x H)
585 x 250 x 50 mm 260 x 250 x 50 mm
WEIGHT Approx. 4.6 kg Approx. 2.5 kg
TYPICAL RESPONSE CURVES
TYPICAL RESPONSE CURVES
PROCOM A/S reserve the right to amend specifications
without prior notice.
11/12/13