Procom CXL 230-1LW-DAB - Manual

CXL 230-1LW/DAB
Universal, Unity-Gain Base Station and Marine DAB
Antenna
DESCRIPTION
This multi-purpose, omnidirectional, rod-type base station and marine
antenna covers the DAB band and can be used in a wide variety of
applications.
The broad-banded ½ λ dipole antenna element is sealed in a high-
quality glass fibre tube with low wind-load, which will ensure
performance undisturbed by corrosive environments.
Approximately 0 dBd gain.
Provided with the sturdy “LW” mast mount – a lightweight,
multipurpose,
epoxy-coated mounting bracket made of non-corrosive aluminium.
The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in
outer diameter.
The cable can be led either on the outside or along the inside of the
mast tube.
Large bandwidth with respect to both SWR and gain.
All metal parts in the antenna are DC-grounded to reduce the noise
caused by atmospherical discharge. Consequently, the antenna shows a
DC-short across the coaxial cable.
The CXL 230-1LW/DAB is a vibration-proof, lightweight, slim-line,
corrosion-resistant, modern style base station and marine antenna.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
CXL 230-1LW/DAB 110000114
SPECIFICATIONS
ELECTRICAL
MODEL CXL 230-1LW/DAB
ANTENNA TYPE ½ λ coaxial dipole, broad-banded
FREQUENCY 223 - 240 MHz
IMPEDANCE Nom. 50 Ω
RADIATION Omnidirectional
POLARIZATION Vertical
GAIN 2 dBi 0 dBd
BANDWIDTH 17 MHz
SWR < 1.5
MAX. POWER 150 W
ANTISTATIC
PROTECTION
All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
TEMP. RANGE -30° C → +70° C
CONNECTOR N-female
WIND SURFACE 0.0172 m²
WIND LOAD 22 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Seawater resistant
aluminium, epoxy-coated
Clamps: Stainless steel
TOTAL HEIGHT Approx. 1.26 m (Dep. on frequency)
WEIGHT Approx. 760 g
MOUNTING On 16 to 54 mm dia. mast tube
MULTI-PURPOSE MOUNTING BRACKET
PLEASE NOTE
The antenna is delivered with a DC-connection between the antenna
element and the mounting bracket.