Procom GPS-100-kt-fme User Manual
Gps 100 kt-fme
GPS 100 KT-FME
Active Receiving Antenna for the 1575 MHz NAVSTAR
GPS Satellite Navigational System for Landmobile and
Maritime Use
DESCRIPTION
Flat-pack GPS-antenna for temporary or fixed installations.
Full hemispherical coverage.
Built-in high gain, low noise amplifier.
Right-hand circular polarization (RHCP).
Magnet mount – ideal for mounting on e.g. roof of car or vessel.
5 V supply voltage (3 V respectively 12 V available on request).
DC supply via RF-connector.
Permanently attached 5 m RG 174 coaxial cable terminated with FME
(female) connector.
Wide range of FME-accessories available.
Do not use sealer on rubber gasket or other places.
Ordering designations
TYPE NO.
PRODUCT NO.
GPS 100 KT-FME
112000022
SPECIFICATIONS
ELECTRICAL GENERAL SPECIFICATIONS
MODEL
GPS 100 KT-FME
ANTENNA TYPE
Active patch antenna
FREQUENCY
1575 MHz (DCS)
IMPEDANCE
Nom. 50 Ω
POLARISATION
Circular right-hand
COVERAGE
Hemispherical
GAIN (in axial direction)
27 dBi (typ.)
CROSS-POLARISATION ATT.
> 10 dB (typ.)
SELECTIVITY
> 45 dB down at ± 45 MHz
BUILT-IN AMPLIFIER
GAIN
> 26 dB (typ.)
NOISE FIGURE
≤ 3 dB (typ.)
SWR (output)
≤ 2.0
SUPPLY VOLTAGE
5 ± 0.5 VDC
CURRENT CONSUMPTION
Approx. 25 mA
MECHANICAL
MATERIALS
Aluminium and ABS
ANTENNA COLOUR
Black
TEMP. RANGE
-35° C →+75° C
CONNECTOR
FME-female
CABLE
5 m RG 174
HEIGHT
15 mm
WIDTH/LENGTH
ø50 mm
WEIGHT
Approx. 130 g
FME-SYSTEM ACCESSORIES
FME-CABLES
LENGTH
TYPE NO.
1 m
1 m FME
2 m
2 m FME
3 m
3 m FME
4 m
4 m FME
5 m
5 m FME
6 m
6 m FME
4 m white
4 m FME-white
6 m white
6 m FME-white
12 m white
12 m FME-white
18 m white
18 m FME-white
FME-CONNECTORS
CONNECTOR
ORDER NO.
FME-FME
FME-FME
Prolongation
FMEP
N
FME-N
FSMA
FME-FSMA
BNC
FME-BNC
TNC
FME.TNC
UHF
FME-UHF
Mini-UHF
FME-MUHF
Elbow-MUHF
FME-EMUHF
Elbow-BNC
FME-EBNC
Elbow-TNC
FME-ETNC
SMA
FME-SMA
For further information about other types of FME-cables please compare the cable data sheets under
accessories in our catalogue.