Procom TM User Manual
Procom Accessories communication

TM
Truck Mirror Bracket
DESCRIPTION
Using the TM, the Procom type Z-mount can be fixed on the mirror
clamps of a truck.
All Z-mount antennas for frequencies below 175 MHz can be mounted
using the TM.
ORDERING DESIGNATION
TYPE NO.
PRODUCT NO.
TM
SPECIFICATIONS
APPLICATION
Bracket for installation of Z-mount antennas on the
mirror clamps of the truck
FREQUENCY
Can be applied with antennas up to 175 MHz
MATERIAL
Zink-coated steel
COLOUR
Black
MOUNTING HOLE
DIA.
ø 22.5 mm
DIMENSIONS
Height: Approx. 52 mm
Width: Approx. 50 mm
Depth: Approx. 62 mm
WEIGHT
Approx. 190 g
PLEASE NOTE
Remember fastening the two set-screws at the bottom of the mount
1.
after having finished the mounting to ensure a good ground-
connection.
The normal cutting diagrams valid for an antenna mounted directly
2.
on the car roof do not apply when the antenna is mounted on the
TBS. The antenna must be tuned using an SWR-meter.
Procom A/S reserve the right to amend specifications without prior notice.
PROCOM A/S reserve the right to amend specifications
without prior notice.
13/12/11