Procom LPZ 960 - Manual

LPZ 960
Coaxial Low-Pass Filter for the 900 MHz Band
DESCRIPTION
Passes all signals in or below the 900 MHz band.
Rejects signals above this range.
Absolute stop band from 1640 MHz to 6 GHz
- no degradation at harmonics (Zolotarev-characteristic).
Attenuation in stop band better than 60 dB.
Insertion loss in pass range less than 0.4 dB.
Provided with brackets for panel mounting.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
LPZ 960 200001291
SPECIFICATIONS
ELECTRICAL
MODEL LPZ 960
FILTER TYPE Low-pass filter for the 900 MHz band
FREQUENCY Pass band: 820 - 960 MHz
Stop band: 1.64 - 6 GHz
MAX. INPUT POWER 150 W
INSERTION LOSS (PASS BAND) ≤ 0.4 dB
1 dB CUT-OFF FREQUENCY > 970 MHz
ATTENUATION (STOP BAND) > 60 dB
MECHANICAL
TEMP. RANGE –30° C → +80° C
CONNECTORS N-female
DIMENSIONS (L x W x H) 165 x 40 x 36 mm
WEIGHT Approx. 240 g
TYPICAL RESPONSE CURVES
The LPZ 960 is used to prevent RFI (Radio Frequency Interference) caused
by excessive harmonicgeneration from transmitters operating in the 900
MHz band. By rejection, the filter reduces the amplitude of the harmonics
and prevents them from being radiated by the antenna.
The filter is normally used in connection with base station transmitters, but
as it is mechanically very ruggedly designed, it is perfectly suited for mobile
and marine applications as well.
PROCOM A/S reserve the right to amend specifications
without prior notice.
15/03/11