Procom CXL 1800-6 - Manual

CXL 1800-6
6 dBd Omnidirectional Base Station and Marine Antenna for
the 1800 MHz Band
DESCRIPTION
Vertically polarized, omnidirectional base station and marine antenna.
Approximately 6 dBd gain.
Simple mounting using the 1” revolving nut system.
Wide variety of accessory mounting brackets available.
Large bandwidth with respect to both SWR and gain. Highly suitable for
duplex operation with large spacing between the TX and the RX
frequencies, e.g. the DCS-1800/PCN cellular system.
The antenna element is sealed in a high-quality, conical glass fibre tube.
All metal parts in the antenna are DC-grounded to reduce the noise
caused by atmospherical discharge. Consequently, the antenna shows a
DC-short across the coaxial cable.
The CXL 1800-6 is a vibration-proof, lightweight, slim-line, corrosion
resistant, modern style base station and marine antenna.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
CXL 1800-6 100000186
SPECIFICATIONS
ELECTRICAL
MODEL CXL 1800-6
ANTENNA TYPE Coaxial, collinear antenna, broad-banded
FREQUENCY 1700 – 1900 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 8 dBi 6 dBd
BANDWIDTH ≥ 200 MHz @ SWR ≤ 1.75
SWR ≤ 1.75, typ. ≤ 1.5
MAX. POWER 100 W
ANTISTATIC
PROTECTION
All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE Approx. 0.03 m²
WIND LOAD Approx. 38 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Chromed brass
TOTAL HEIGHT Approx. 1.15 m
DIA. IN TOP END 21 mm
DIA. IN BOTTOM END 23 mm
WEIGHT Approx. 700 g
MOUNTING On 1” RG (G1”-11) threaded water pipe or
on optional mounting brackets (see below)
ACCESSORIES (to be ordered separately)