Procom CXL 1800-3lw - Manual

CXL 1800-3LW
3 dBd Omnidirectional Base Station and Marine Antenna for
the 1800 MHz Band
DESCRIPTION
Vertically polarized, omnidirectional base station and marine antenna.
Approximately 3 dBd gain.
Provided with the sturdy “LW” mast mount – a lightweight,
multipurpose, epoxy-coated mounting bracket made of non-corrosive
aluminium.
The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to
54 mm in outer diameter.
The cable can be led either on the outside or along the inside of the
mast tube.
Large bandwidth with respect to both SWR and gain.
Highly suitable for duplex operation with large spacing between the TX
and the RX frequencies, e.g. the DCS-1800/PCN cellular system.
The antenna element is sealed in a high-quality, conical glass fibre tube.
All metal parts in the antenna are DC-grounded to reduce the noise
caused by atmospherical discharge.
Consequently, the antenna shows a DC-short across the coaxial cable.
The CXL 1800-3LW is a vibration-proof, lightweight, slim-line, corrosion
resistant, modern style base station and marine antenna.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
CXL 1800-3LW 100000175
SPECIFICATIONS
ELECTRICAL
MODEL CXL 1800-3LW
ANTENNA TYPE Coaxial, collinear antenna, broadbanded
FREQUENCY 1710 – 1880 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 5 dBi 3 dBd
BANDWIDTH ≥ 170 MHz @ SWR ≤ 2.0
SWR ≤ 2.0, typ. ≤ 1.75
MAX. POWER 100 W
ANTISTATIC
PROTECTION
All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE Approx. 0.02 m²
WIND LOAD Approx. 25 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Seawater resistant aluminium,
epoxy-coated
Clamps: Stainless steel
TOTAL HEIGHT Approx. 700 mm
DIA. IN TOP END 12 mm
DIA. IN BOTTOM END 16 mm
WEIGHT Approx. 600 g
MOUNTING On 16 to 54 mm dia. mast tube
MULTI-PURPOSE MOUNTING BRACKET
PLEASE NOTE
The antenna is delivered with a DC-connection between the antenna
element and the mounting bracket.