Procom MU 906-x-... User Manual
Mu 906-x
MU 906-X/...
Collinear 6 dB Mobile Antenna for the 900 MHz Band
DESCRIPTION
6 dB omnidirectional gain when mounted on the car roof.
Rear wing mounting possible with only minor reduction of gain.
3 models, type “l”, “m” and “h”, cover band segments suiting the most
common 900 MHz CELLULAR networks such as EAMPS, ETACS, NMT-
900 and EGSM.
Excellent for use together with a diplexer (type LH 108/136) for
combined car radio broadcast reception and 900 MHz transceiving.
Stainless steel X-mount with M6-thread whip-fastening system.
Simple mounting exclusively with access from the outside.
Models available with X-mount (oblong) and CX-mount (circular).
Choice between two connection principles:
X-mount: FME-connection (supplied without cable).
XP4-mount: Permanently attached 4 m low loss cable terminated
with FME-connector.
All whips are compatible with all mounts.
ORDERING DESIGNATIONS
TYPE
PRODUCT NO.
FREQUENCY
MOUNT VERSION
MU 906-X/l
130001191
824 - 894 MHz
(EAMPS)
X-mount
(oblong)
with FME-system
MU 906-X/m
130001195
872 - 950 MHz
(ETACS)
MU 906-X/h
130001187
880 - 960 MHz
(EGSM&NMT-900)
MU 906-CX/l
130001192
824 - 894 MHz
(EAMPS)
CX-mount
(circular)
with FME-system
MU 906-CX/m
130001196
872 - 950 MHz
(ETACS)
MU 906-CX/h
130001188
880 - 960 MHz
(EGSM&NMT-900)
MU 906-XP4/l
130001193
824 - 894 MHz
(EAMPS)
XP4-mount
(oblong)
with 4 m cable
+ FME-connector
MU 906-XP4/m
130001197
872 - 950 MHz
(ETACS)
MU 906-XP4/h
130001189
880 - 960 MHz
(EGSM&NMT-900)
MU 906-CXP4/l
130001194
824 - 894 MHz
(EAMPS)
CXP4-mount
(circular)
with 4 m cable
+ FME-connector
MU 906-CXP4/m
130001198
872 - 950 MHz
(ETACS)
MU 906-CXP4/h
130001190
880 - 960 MHz
(EGSM&NMT-900)
SPECIFICATIONS
ELECTRICAL
MODEL
MU 906-X/...
ANTENNA TYPE
Collinear mobile antenna
FREQUENCY
900 MHz-band covered by three models
IMPEDANCE
Nom. 50 Ω
POLARIZATION
Vertical
GAIN
6 dB (acc. to EIA RS-329-1)
BANDWIDTH
≥ 50 MHz @ SWR ≤ 1.5
≥ 100 MHz @ SWR ≤ 2.0
SWR
≤ 1.2 @ f. res.
MAX. POWER
60 W
MECHANICAL
MATERIALS
Whip:
Stainless steel and black-chromed brass
Mount:
Black-chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION
TORQUE
4 ± 1 Nm
COLOUR
Black
HEIGHT
Approx. 60 mm
WEIGHT
X-version: Approx. 100 g
XP4-version: Approx. 240 g
MOUNTING
18 mm dia. hole