Procom GPS-C mc-tetra-fm - Manual

GPS-C-MC-TETRA/FM
GPS Antenna with Whip with Shock Spring for the FM Band
and TETRA Band
DESCRIPTION
GPS-antenna for fixed installations.
External antenna whip mounted on the GPS-Combi mount.
Full hemispherical coverage.
Built-in high-gain, low-noise amplifier.
Right-Hand Circularly Polarized antenna (RHCP).
5 V supply voltage (3 V respectively 12 V available on request).
DC supply via RF-connector.
Sturdy, general-purpose ¼ λ antenna in professional quality.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
GPS-C-MC-TETRA/FM 132000150
GPS-C-MC-TETRA/FM-21-23 mm 132000151
DIPX 225/330-FME (optional) 200000670
SPECIFICATIONS FOR WHIP
ELECTRICAL
MODEL GPS-C-MC-TETRA/FM
ANTENNA TYPE Mobile antenna
FREQUENCY
FM band: 88 - 108 MHz,
TETRA band: 380 - 400 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN
FM band: Approx -3 dB (acc. to ¼ λ whip on a motorbike)
TETRA band: Approx 0 dB (acc. to ¼ λ whip on a motorbike)
BANDWIDTH TETRA band: ≥ 20 MHz @ SWR ≤ 2.0
SWR ≤ 1.5 @ f.res. in both bands
MAX. POWER 25 W
MECHANICAL
MATERIALS Whip: Polyethylene-covered copper thread / glass fibre
Black-chromed brass
Spring: Black-chromed stainless steel
COLOUR Black
HEIGHT Approx. 550 mm
WEIGHT 50 g
MOUNTING On the GPS-Combi mount
SPECIFICATIONS FOR GPS-COMBI MOUNT
ELECTRICAL GENERAL SPECIFICATIONS
MODEL GPS-COMBI MOUNT
ANTENNA TYPE Active patch antenna
FREQUENCY 1575 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Circular right-hand
COVERAGE Hemispherical
GAIN 28 dBic in axial direction (typ.)
CROSS-POLARIZATION ATT. > 10 dB (typ.)
SELECTIVITY > 45 dB down @ ± 45 MHz
BUILT-IN AMPLIFIER
GAIN > 30 dB (typ.)
NOISE FIGURE < 1 dB (typ.)
P 1dB
Approx. +7 dBm
SWR (output) ≤ 2.0
SUPPLY VOLTAGE 5 ± 0.5 VDC (3 V resp. 12 V on request)
CURRENT CONSUMPTION Approx. 25 mA
MECHANICAL (ONLY FOR THE GPS-PART)
MATERIALS Cu-nite brass
Stainless steel
Reinforced thermoplastic
ANTENNA COLOUR Black
TEMP. RANGE -35° C →+75° C
CONNECTOR FME (male for GPS) +
FME (female for mobile antenna)
RECOMMENDED
INSTALL. TORQUE
4 ± 0.5 Nm
DIMENSIONS (H x L) Approx. 30 x 89 mm
ROOF THICKNESS Max. 2.5 mm
WEIGHT Approx. 114 g
MOUNTING ø18.0 mm dia. hole for roof thickness up
to 2.0 mm. ø18.5 mm dia. hole for
roof thickness 2.0 - 2.5 mm
Tools for mounting included
OPTIONAL For mounting hole 21-23 mm use
GPS-Combi mount 21-23 mm