Procom GF 900-1800 - Manual

GF 900/1800
Dual-frequency GlassFix® Antenna for the 900 MHz and
1800 MHz Bands
DESCRIPTION
Dual-frequency antenna using the GlassFix®mounting principle.
Covers both EGSM/NMT-900 and DCS-1800/PCN in one antenna.
For direct use with:
– an EGSM/DCS-1800/PCN mobile phone (single or dual-band)
or
– an EGSM and a DCS-1800/PCN mobile phone (requires diplexer, type
DIPX 1000/1550).
Mounting on car window glass – no holes required.
Instant-adhesion procedure for fast and reliable fixing.
Half-wave design – no ground plane required.
Internal matching unit provided with FME-connection (FME-cable to be
ordered separately).
Simple tuning procedure by means of tuning screw on matching unit.
Swivel joint for 180° angle adjustment of the antenna.
If removal of the antenna installation is necessary, a quick dismantling
procedure leaves no trace of the installation.
Ordering designations
TYPE NO. PRODUCT NO.
GF 900/1800 130001136
NOTE:
GF antennas are not suitable for car models with windows that have heat
reflective coating.
SPECIFICATIONS
ELECTRICAL
MODEL GF 900/1800
ANTENNA TYPE Dual-frequency GlassFix®antenna
FREQUENCY 880–960 MHz (EGSM/NMT-900)
1710–1880 MHz (DCS-1800/PCN)
IMPEDANCE Nom. 50 Ω
POLARISATION Vertical
BAND WIDTH 900 MHz: Approx. 25 MHz @ SWR ≤ 2.0 (typ.)
1800 MHz: Approx. 100 MHz @ SWR ≤ 2.0 (typ.)
SWR ≤ 2.0 @ f.res.
MAX. POWER 25 W
MECHANICAL
MATERIALS Whip:
Black-chromed stainless steel
Black-chromed brass
Mount and indoor unit:
Environment-proof plastics
Corrosion-safe
and corrosion-protected metals
CABLE FME-cable to be ordered separately
COLOUR Black
HEIGHT Approx. 100 mm
WEIGHT Approx. 60 g
MOUNTING On car windows (52 mm x 47 mm obstruction-free
mounting area required)
GLASS
THICKNESS
2.5 – 7.0 mm
FME-SYSTEM ACCESSORIES
FME-CABLES
LENGTH TYPE NO.
1 m 1 m FME
2 m 2 m FME
3 m 3 m FME
4 m 4 m FME
5 m 5 m FME
6 m 6 m FME
4 m white 4 m FME-white
6 m white 6 m FME-white
12 m white 12 m FME-white
18 m white 18 m FME-white
FME-CONNECTORS
CONNECTOR ORDER NO.
FME-FME FME-FME
Prolongation FMEP
N FME-N
FSMA FME-FSMA
BNC FME-BNC
TNC FME.TNC
UHF FME-UHF
Mini-UHF FME-MUHF
Elbow-MUHF FME-EMUHF
Elbow-BNC FME-EBNC
Elbow-TNC FME-ETNC
SMA FME-SMA
For further information about other types of FME-cables please compare the cable data sheets under
accessories in our catalogue.
OPERATION USING A DIPLEXER
In case of operating two transceivers on one antenna at the same time, a
diplexer, type DIPX 1000/1550, is necessary to complete the system. The
tasks of the diplexer are to protect the two receiver inputs from being
destroyed by the transmitter in the contrary band, and to ensure a low-loss