Procom BPF 10g-9 - Manual

BPF 10G/9
Interdigital Band-Pass Filter for the 10 GHz Band
DESCRIPTION
The BPF 10G/9 is a 9-resonator, interdigital band-pass filter for
multichannel systems in the 10 GHz band.
Using interdigital principles the following features are obtained at the
same time:
Wide Pass Range
Low insertion loss and ripple inside pass range
Steep slopes immediately outside pass range
Heavy attenuation outside the pass range.
The BPF 10G/9 housing is made of silvered brass. Careful design and
choice of materials ensure a long lifetime and reliable operation over a
wide temperature range.
The filter can be delivered with centre frequency between
9.5 GHz and 11.5 GHz. The specifications and the curves below refer to
a filter with 500 MHz port width, but interdigital filters with other port
widths and filter characteristics may be quoted on request.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
BPF 10G/9 200000936
SPECIFICATIONS
ELECTRICAL
MODEL BPF 10G/9
FILTER TYPE Interdigital band-pass filter
CENTRE FREQUENCY To be stated within 9.5 and 11.5 GHz
MAX. INPUT POWER 10 W
PASS RANGE WIDTH 500 MHz
INSERTION LOSS <1.0 dB, typ.
ATTENUATION AROUND PASSBAND ± 400 MHz rel. fc: approx. 30 dB
± 500 MHz rel. fc: approx. 60 dB
ATTENUATION OUTSIDE PASS-RANGE > 70 dB, typ. > 75–80 dB
IMPEDANCE Nom. 50 Ω
SWR < 1.5
MECHANICAL
TEMP. RANGE –30° C → +60° C
FREQ. STABILITY Approx. 8 ppm/° C
CONNECTORS SMA-female
DIMENSIONS (L x W x H) 104 x 10 x approx. 20 mm
incl. conn.
WEIGHT Approx. 100 g
PROCOM A/S reserve the right to amend specifications
without prior notice.
17/03/11