Procom MU 5-z-... - Manual

MU 5-Z/...
Unity Gain ¼ λ Mobile Antenna for the 450 MHz Band
DESCRIPTION
Sturdy, conical, flexible rubber whip.
MU 5-Z/s covers 370 – 410 MHz
MU 5-Z/l covers 406 – 440 MHz
MU 5-Z/h covers 430 – 470 MHz
– no tuning required.
Stainless steel Z-mount with ball-joint and wing screw whip-fastening
system.
Simple mounting exclusively with access from the outside.
Models with roof thickness from 2 mm to 7.5 mm mounting from the
inside.
Choice between two connection principles:
Z-mount: FME-connection (supplied without cable).
ZP4-mount: Permanently attached 4 m cable terminated with FME-
connector.
ORDERING DESIGNATION
TYPE PRODUCT NO. FREQUENCY RANGE
Z-mount with FME-system
MU 5-Z/s
130001041 370 - 410 MHz
MU 5-Z/l 130001042 406 - 440 MHz
MU 5-Z/h 130001045 430 - 470 MHz
ZP4-mount with 4 m cable and FME-connector
MU 5-ZP4/s
130001050 370 - 410 MHz
MU 5-ZP4/l 130001047 406 - 440 MHz
MU 5-ZP4/h 130001048 430 - 470 MHz
SPECIFICATIONS
ELECTRICAL
MODEL MU 5-Z/...
ANTENNA TYPE ¼ λ mobile whip antenna
FREQUENCY 450 MHz-band covered by three models
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 0 dB (acc. to EIA RS-329-1)
BANDWIDTH ≥ 45 MHz @ SWR ≤ 1.5
SWR ≤ 1.2 @ f. res.
MAX. POWER 100 W
MECHANICAL
MATERIALS Whip:
Sturdy, flexible rubber with cast-in multicore
steel wire radiating element
Chromed brass
Mount:
Chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED
INSTALLATION
TORQUE
7.5 ± 1 Nm
COLOUR Black/Bright chromium
HEIGHT Approx. 190 mm
WEIGHT Z-version: Approx. 160 g
ZP4-version: Approx. 300 g
MOUNTING ø21 mm dia. hole (For roof thickness 2 mm up to
7.5 mm mounting hole should be ø22 mm dia.)
ROOF THICKNESS Max. 2.0 mm (Models up to 7.5 mm on request)