Procom BPF 24g-7 User Manual
Bpf 24g/7

BPF 24G/7
Interdigital Band-Pass Filter for the 24 GHz Band
DESCRIPTION
The BPF 24G/7 is a 7-resonator, interdigital band-pass filter for
multichannel systems in the 24 GHz band.
Using interdigital principles the following features are obtained at the
same time:
Wide Pass Range
Low insertion loss and ripple inside pass range
Steep slopes immediately outside pass range
Heavy attenuation outside the pass range.
The BPF 24G/7 housing is made of silvered brass. Careful design and
choice of materials ensure a long lifetime and reliable operation over a
wide temperature range.
The filter can be delivered with centre frequency between
20 and 25 GHz. The specifications and the curves below refer to a filter
with 1 GHz port width, but interdigital filters with other port widths and
filter characteristics may be quoted on request.
ORDERING DESIGNATIONS
TYPE
PRODUCT NO.
BPF 24G/7
200000801
SPECIFICATIONS
ELECTRICAL
MODEL
BPF 24G/7
FILTER TYPE
Interdigital band-pass filter
CENTRE FREQUENCY
To be stated within 20 and 25 GHz
MAX. INPUT POWER
10 W
PASS RANGE WIDTH
1 GHz
INSERTION LOSS
<1.0 dB, typ.
ATTENUATION AROUND PASSBAND
± 1 GHz rel. fc: approx. 30 dB
± 2 GHz rel. fc: approx. 60 dB
ATTENUATION OUTSIDE PASS-RANGE
> 70 dB, typ. > 75 – 80 dB
IMPEDANCE
Nom. 50 Ω
SWR
< 1.5
MECHANICAL
TEMP. RANGE
–30° C → +60° C
FREQ. STABILITY
Approx. 8 ppm/° C
CONNECTORS
SMA-female
DIMENSIONS (L x W x H)
65 x 6.8 x approx. 18 mm incl. conn.
WEIGHT
Approx. 60 g
PROCOM A/S reserve the right to amend specifications
without prior notice.
17/03/11