Procom CXL 2400-8LW-... - Manual

CXL 2400-8LW/...
8 dBd Omnidirectional Base Station and Marine Antenna for
the 2400 MHz Band
DESCRIPTION
Vertically polarized, omnidirectional base station and marine antenna.
Approximately 8 dBd gain.
Provided with the sturdy “LW” mast mount – a lightweight,
multipurpose, epoxy-coated mounting bracket made of non-corrosive
aluminium.
The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to
54 mm in outer diameter.
The cable can be led either on the outside or along the inside of the
mast tube.
Large bandwidth with respect to both SWR and gain.
Highly suitable for duplex operation with large spacing between the TX
and the RX frequencies.
The antenna element is sealed in a high-quality, conical glass fibre tube.
All metal parts in the antenna are DC-grounded to reduce the noise
caused by atmospherical discharge. Consequently, the antenna shows a
DC-short across the coaxial cable.
The CXL 2400-8LW/… is a vibration-proof, lightweight, slim-line,
corrosion resistant, modern style base station and marine antenna.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY
CXL 2400-8LW/l 100000170 2300 – 2400 MHz
CXL 2400-8LW/m 100000172 2400 – 2500 MHz
CXL 2400-8LW/h 100000168 2530 – 2660 MHz
SPECIFICATIONS
ELECTRICAL
MODEL CXL 2400-8LW/...
ANTENNA TYPE Coaxial, collinear antenna, broadbanded
FREQUENCY Models within 2300 – 2660 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN Average gain 10 dBi 8 dBd
BANDWIDTH ≥ 100 MHz @ SWR ≤ 1.5
SWR ≤ 1.5
MAX. POWER 100 W
ANTISTATIC
PROTECTION
All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE Approx. 0.033 m²
WIND LOAD Approx. 42 N @ 160 km/h
COLOUR Marine white
MATERIALS Shroud: Polyurethane-coated glass fibre
Mounting bracket: Seawater resistant aluminium,
epoxy-coated
Clamps: Stainless steel
TOTAL HEIGHT Approx. 1.15 m
DIA. IN TOP END 21 mm
DIA. IN BOTTOM END 23 mm
WEIGHT Approx. 900 g
MOUNTING On 16 to 54 mm dia. mast tube
MULTI-PURPOSE MOUNTING BRACKET
PLEASE NOTE
The antenna is delivered with a DC-connection between the antenna
element and the mounting bracket.