Procom LPZ-470 - Manual

LPZ 470
Coaxial Low-Pass Filter for the 450 MHz Band
DESCRIPTION
Passes all signals in or below the 450 MHz-band.
Rejects signals above this range.
Absolute stop band from 760 MHz to 6 GHz
– no degradation at harmonics (Zolotarev-characteristic).
Attenuation in stop band better than 50 dB.
Insertion loss in pass range less than 0.4 dB.
Provided with brackets for panel mounting.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
LPZ 470 200001289
SPECIFICATIONS
ELECTRICAL
MODEL LPZ 470
FILTER TYPE Low-pass filter for the 450 MHz band
FREQUENCY Pass band: 380 - 470 MHz
Stop band: 760 MHz - 6 GHz
MAX. INPUT POWER 150 W
INSERTION LOSS (PASS BAND) ≤ 0.4 dB
1 dB CUT-OFF FREQUENCY > 480 MHz
ATTENUATION (STOP BAND) > 50 dB
MECHANICAL
TEMP. RANGE –30° C → +80° C
CONNECTORS N-female
DIMENSIONS (L x W x H) 165 x 40 x 36 mm
WEIGHT Approx. 240 g
TYPICAL RESPONSE CURVES
The LPZ 470 is used to prevent RFI (Radio Frequency Interference) caused
by excessive harmonic-generation from transmitters operating in the 450
MHz band. By rejection, the filter reduces the amplitude of the harmonics
and prevents them from being radiated by the antenna.
The filter is normally used in connection with base station transmitters, but
as it is mechanically very ruggedly designed, it is perfectly suited for mobile
and marine applications as well.
PROCOM A/S reserve the right to amend specifications
without prior notice.
12/09/11