Procom HX 2-...-ic-f51 - Manual

HX 2/...-IC-F51
Helical Antenna for ICOM Portable Equipment in the 2 m
Band
DESCRIPTION
Flexible, conical steel helix moulded in flexible thermoplastic rubber.
Reduced-size ¼ λ helical antenna whip.
Optimum performance compared to physical dimensions.
Delivered factory tuned and tested to ensure minimum SWR.
Especially designed for ICOM IC-F51 (150 MHz band).
ORDERING DESIGNATIONS
TYPE PRODUCT NO. FREQUENCY
HX 2/l-IC-F51 140000132 144 - 160 MHz
HX 2/m-IC-F51 140000133 152 - 168 MHz
HX 2/h-IC-F51 140000126 160 - 175 MHz
SPECIFICATIONS
ELECTRICAL
MODEL HX 2/...-IC-F51
ANTENNA TYPE Shortened ¼ λ helical antenna for portable equipment
FREQUENCY 2 m band covered by three models
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN Approx. -3 dB (compared to a ¼ λ portable antenna
on the same equipment)
BANDWIDTH ≥ 16 MHz @ SWR ≤ 3.0
SWR < 1.5 when mounted directly on portable equipment
MAX. POWER 50 W
MECHANICAL
MATERIALS Steel helix moulded in flexible thermoplastic rubber
Weather- and shockproof plastics
Black-chromed brass
COLOUR Black
TOTAL HEIGHT Approx. 150 mm (dep. on type)
WEIGHT Approx. 30 g
CONNECTOR SMA (male) special for IC-F51
TYPICAL SWR CURVES
PROCOM A/S reserve the right to amend specifications
without prior notice.
06/12/11