Procom HP 380-fme - Manual

HP 380-FME
High-Pass Filter for 380 - 1000 MHz
DESCRIPTION
HP 380-FME is an LC High-Pass filter.
Allows the whole 380 – 1000 MHz to pass.
Can be used, together with LP 174-FME, to prevent possible interference
between VHF and UHF radio systems, e.g. VHF LMR and TETRA.
Can be used as a preselector to protect a receiver against interferences
from transmitters normally being outside the pass range.
HP 380-FME can be mounted as a preselector directly inside the PRO-
AR4G-N, PRO-AR8G-N and the PRO-AR16G-N receiver multicouplers.
Very small dimensions, mounted in a 45 x 50 mm box.
FME connectors for easy and handy coupling to the surroundings.
HP 380-FME is lacquered with black vinyl enamel to avoid corrosion.
ORDERING DESIGNATIONS
TYPE PRODUCT NO.
HP 380-FME 200002183
SPECIFICATIONS
ELECTRICAL
MODEL HP 380-FME
PASS RANGE 380 - 1000 MHz
MAX. INPUT POWER 35 W
INSERTION LOSS ≤ 0.5 dB typically ≤ 0.4 dB
SWR ≤ 1.5
OUT OF BAND ATTENUATION ≥ 60 dB @ 0-174 MHz
IMPEDANCE Nom. 50 Ω
MECHANICAL
TEMP. RANGE –30° C → +60° C
CONNECTORS FME-male (others on request)
DIMENSIONS (W x H x D) 50 x 21 x 48 mm / 1.97 x 0.83 x 1.89 inches
WEIGHT Approx. 60 g / 0.13 pound
TYPICAL RESPONSE CURVES
PROCOM A/S reserve the right to amend specifications
without prior notice.
12/03/13