Universal Audio Apollo Twin - Manual (Page 14)

Apollo Twin Hardware Manual Chapter 2: Quick Start 14
Chapter 2: Quick Start
Quick Start Overview
Apollo Twin hardware and software installation and setup consists of the main steps be-
low. These steps are detailed in this chapter.
1. Connect and power the Apollo Twin hardware
2. Download and install the Apollo Twin software
3. Update the Apollo Twin firmware (if prompted)
4. Register the hardware and authorize UAD plug-ins
5. Learn how to adjust Apollo Twin's input and output levels
System Requirements
All system requirements must be met for the Apollo Twin system to operate properly. Be-
fore proceeding with installation and authorization, see the
System Requirements .
Getting Started Videos
Helpful videos are available to assist you with installation and setup. Visit the Apollo
Twin start page to view the videos online:
• www.uaudio.com/twin/thanks
About Registration and Authorization
The Apollo Twin hardware must be registered and authorized at my.uaudio.com to unlock
UAD Powered Plug-Ins that are bundled with the product. Registration only needs to be
completed once, however authorization should be completed each time the Apollo Twin
software is updated.
The Apollo Twin hardware stores its authorization and UAD licenses in the device itself,
so the unit can be connected to a different computer without repeating the authorization
process. UAD plug-ins that were not bundled with the product can be evaluated without
functional restriction during a demonstration mode that expires after 14 days.