SENA DirectPort-USB - Manual (Page 19)

DirectPort-USB
Page 19 of 36
8. Manual Driver Installation for Windows Vista/2008
 Install procedures for 64bit drivers are identical to 32bit drivers
1. Run Windows Vista
2. Connect DirectPort-USB to your PC’s USB port.
3. Insert media CD(provided with DirectPort) into the CD drive
4. Click “Locate and install driver software (recommended)” on the “Found New Hardware” window.
5. Step 4 will automatically install drivers in the CD. Dual RS232 will automatically be installed.
6. Following picture depicts Device Manager after carrying out step 4. As can be seen, all “USB Serial
Converters” are successfully installed. The number of lines may vary depending on the product you are
using.