SENA LS100 - Manual (Page 12)

12
2.2.3 Connecting To The Device
Connect the serial data cable between the LS100 and the serial device. If necessary, supply the
power to the serial device attached to the LS100.
Figure 2-4 Connecting a serial device to the LS100
2.3. Accessing Console Port
There are two ways to access console port of the LS100 depending on whether the user is located at
a local site or a remote site.
- Serial console:
Local users can connect directly to the serial console port of the LS100 using serial console/data
cable (null-modem cable). The serial port of the LS100 is used as the console port as well as the
data port. To use the serial port as the console port, slide Data/Console switch to the Console
side.
- Remote console:
Remote users can make a telnet connection to the remote console port (port 23) of the LS100
via TCP/IP network.
Both methods require the user to log into the LS100 in order to continue.