SENA Device Server and Serial_IP Application Guide - Manual (Page 26)

5. Appendix
- Host mode configuration between the Serial/IP and Sena Device server in
communication depends on the TCP data initiation.
- Depending upon the application scenario, user should choose the host mode of
communication.
- If there is any communication error, please check on the Port Monitor window.
- Below are 3 common causes for errors in communication.
?? If the timeout is set to less in the user application that it has to be with the
program)
?? If pin information is not matched with the serial device.
?? If user application does not support the serial software.
?? If the user has a firewall blocking port communication.
- Lite Series Manual
- Pro Series Manual
- Super Series Manual
- STS Series Manual
- Serial/IP Manual