Factory Direct Hardware Copper Creek DB6410 - Manual

Deadbolt Specifications & Options
ANSI / BHMA ANSI 156.2 Grade-2.
Turn Piece
Diameter
2-1/2”.
Cylinder 6 pin C std.- 6 pin KW1 optional .
Keying
As specified: Available Master keyed,
Builder keyed, KD, KA.
Free Spinning
Guard Cover
Standard.
Anti-Pry Shield Standard.
Latch
2-3/4” backset, 2-3/8” optional.
1-1/8” square corner wide faceplate std.
Strike
PT-DS06-4H 2-3/4” Strike with PT-ST-
BP-4H steel reinforcing plate std.
Door Prep
1” edge bore, 1” or 1-1/8” x 2-1/4” latch
mortise, 2-1/8” cross bore, 2-3/4” backset
standard, 2-3/8” optional.
Door Thickness Min 1-3/8”, Max 1-3/4”.
Handing
All,6400 Deadbolts are non-handed.
U.L. 3 hour, U.L. Labeled Fire Rated.
Stocking
Finish
Special Order
Finishes
Case
Qty
Case
Wt
Case
Size
SS 10B AB PB PS Units LBS LxWxH
x x x x x 12 24 15x9x12
Bulldog Commercial Hardware
6400 Series ANSI/BHMA Grade-2
Heavy Duty Commercial Deadbolt Specifications
UL LISTED
Meets ADA
Regulations
BULLDOG
Commercial Hardware
Deadbolt Strike Options
PT-DS34FL 3-5/8” x 1-1/4”.
PT-DS34 3-5/8” x 1-1/4”
PT-DS02-4H 2-3/4” x 1-1/8”
PT-DS06-4H 2-3/4” x 1-1/8”
PT-STBP-4H 2-3/4” x 1-1/8”
Strike Reinforcing Plate. Std
with DS02-4H and DS06-4H
Strikes.