English, Faucet installation – Pfister F-042-VGKK User Manual

Page 2

ENGLISH

ENGLISH

FAUCET INSTALLATION

Thank you for purchasing this Price Pﬁster product. All Price Pﬁster products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price Pﬁster

recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.

3 TOOLS RECOMMENDED

• PTFE Plumber's Tape

• Plumber's putty

• Slotted screwdriver

• Adjustable wrench

• Pliers

• Flashlight

• Cloth

Your installation may require new supply lines and / or shut-off valves or other additional
tools.

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are included.

A Faucet

D Pop-up Assembly

G Metal Washer

B Lift

Rod

E Deckplate H

Long Nut

C Base

Ring

F Putty

Plate

If any of these items are missing, please contact Price Pﬁster Consumer Service at
1-800-Pfaucet (1-800-732-8238).

5 INSTALLING FAUCET WITH SINGLE HOLE MOUNTING

Following manufacturer’s recommendations on use, apply plumber’s putty into putty
groove in bottom of Base Ring (5A). Ensure that Base Ring (5A) is placed onto the
base of Faucet Body (5B). From above sink, insert Faucet Supply Tubes (5C) through
Hole (5D) on sink.

6 INSTALLING FAUCET WITH DECKPLATE

Following manufacturer’s recommendations on use, apply plumber’s putty into putty
groove in bottom of Putty Plate (6A). Ensure that the Plastic Putty Plate (6A) is pressed
on the Deckplate (6B). Assemble Deckplate (6B) and Putty Plate (6A) to Faucet Body
(6C). With the handle and spout facing forward, carefully install the Faucet Supply
Tubes (6D) through the center hole of sink (6E).

BOTTOM GROOVE