PolyPlanar SP200RG User Manual
Sp200rg rotating popup speaker, Cutout template
1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000 • Fax (410) 761-6274
.
312” (8mm)
4.520” (116mm)
Cutout
.5
85“(15mm)
SP200RG Rotating Popup Speaker
Cutout Template
5.200” (132mm)
Screw circle Dia.
Scale 1:1
Accuracy may vary when faxed or
otherwise duplicated
Overall diameter with trim ring
5.850” (150mm)
Installation: Find a suitable location making
sure there is clearance for the installed
depth. Use a hole saw or other suitable
device to make a cutout.
Place the speaker in the cutout and mark
and drill holes for the mounting screws. If the
panel is too thin or soft for screws use a
stainless screw clips.
Attach speaker wires supplied, solid color
wire to positive.
Installed depth from Flange
21
.000” (533mm)
Includes 1” (25mm) clearance for wires