PolyPlanar MA6800 - Manual

9.27 ”
Overall Diameter
7.48 ”
Cutout Diameter
1/8”
Hole Diameter
MA6800 Round Speaker Installation Guide
Cutout and use as template for drilling
Installation: Find a suitable
location making sure there is
clearance for the installed
depth. Use a hole saw or
other suitable device to make
a cutout.
Place the speaker in the
cutout and mark and drill
holes
for the mounting
screws (supplied). If the
panel is too thin or soft for
screws use a stainless screw
clips.
Attach
speaker wires
supplied, solid color wire to
positive (red dot or with +
sign or larger tab as shown
on the diagram).
Scale= 1:1
Reproduction may change
accuracy
Mounting Depth
3.43 ”
1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000 • Fax (410) 761-6274 www.polyplanar.com