iSound Theater Sound - Manual - Manual (Page 4)

4
This unit has been produced according to all current safety regulations.
The following safety tips should safeguard users against careless use
and the dangers connected with such use.
• Although this appliance has been carefully manufactured and rigorous-
ly checked prior to leaving the factory, as with all electrical appliances
it is possible for problems to develop. If you notice smoke, an exces-
sive buildup of heat or any other unexpected phenomena, you should
disconnect the plug from the main power socket immediately.
• Ensure that the unit is sufficiently ventilated! Never place next to or
underneath curtains!
• The main plug or appliance coupler is used as the disconnect device,
the disconnect device shall remain readily operable.
• This set should only be connected to a main power supply which
matches that stated on the label on the rear of it-do not attempt to con-
nect it to any other type of supply.
• The socket-outlet must be installed near the equipment and should be
readily accessible.
• To prevent overload, don’t share the same main supply socket with too
many other items of equipment.
• Apparatus with Class 1 construction shall be connected to a main
socket outlet with a protective grounding connection.
• Keep away from rodents. Rodents enjoy biting into electric flexes.
• Always hold the plug when pulling out the plug from the main supply
socket. Do not pull on the flex. The flex can become overloaded and
cause a short circuit.
• Set up the unit so that no one is able to trip over the flex.
• Do not place heavy items on the flex, which may damage it.
• Take note that the flex cannot be reached and pulled by young chil-
dren, avoiding injury.
• Do not set up the unit near heat sources. The casing and the flex could
be damaged by the impact of heat.
• Avoid placing the unit on any surfaces that may be subject to vibra-
tions or shocks.