Troubleshooting, Problem: no power, Problem: no sound – iSound Theater Sound - Manual User Manual
Page 17: Problem: no sound from bluetooth first connection, Problem: function disturbed, Problem: the remote control will not work

17
TROUBLESHOOTING
Problem: No power
Solution: Check that the power is switched on at the wall outlet.
Check if the power cord is properly connected to the power outlet.
Problem: No sound
Solution: Check that the volume control is NOT at minimum setting.
Check that it is NOT set to mute.
Problem: No sound from Bluetooth first
connection
Solution: Check if you have entered password or not. The password is
“0000”.
Problem: Function disturbed
Solution: If none of the above solutions work, then switch off and unplug
your Theater Sound. Leave it off for 2 minutes to reset, and then switch
it back on.
Problem: The remote control will not work
Solution: Inspect or replace the batteries. Make sure there are no ob-
stacles obscuring the front of the Speaker.