Procom E1 Attachment - Manual (Page 5)

Data Sheet
E1- Attachment
E1 Attachment for 4FTR and LCPU
- SDH/PDH master / DVS-21 slave operation
Example 3: Clock extraction from a DVS-21. One device is master, the others are in slave mode.
Two DVS-21 systems are combined together over a modem line and an XMP1. One
DVS-21 generates the clock signal to which the XMP1 and the second DVS-21
synchronize.
The clocking concept is controlled by the CPU1 in each DVS-21. In order for the
system to synchronize to an external clock signal or an HDB3 signal all that is
required is a jumper on the backplane.
The Symbols on the Front Plate and their Meaning (4FTR / LCPU):
The System Blinker
Addressing from processor taking place
I/O Input/Output
BUS output works as push-push operation with the system blinker
BUS input works as push-pull operation with the system blinker
On LF Connection Established
A minimum of one of 30 possible LF connections has been
established
(card set related display)
Al No Receiver Found (No Connection)
(card set related display)
Receiving: Data Frame to E1 Interface
(card set related display)
Date: 19.03.2009 Page: 5/7 Author: HS Document-No.: DB_E1_ 2861_01
© 2008 ProCom, All rights and technical changes reserved